Watch leak detector for the professional use. Perfect for watches with or without watch strap. Leak detection through pressure and/or vacuum. Simple handling with 7 predefined universal testing programmes plus one special programme for locating the leaks. 10 additional testing programmes available, adjustable according to individual requirements.

Product features: • Testing principle: Analysis of the deformation of the watch case by pressure and/or vacuum. • Measuring and testing programmes: Predefined testing programmes: 7 predefined testing programmes, optimized for different watch types.

Customer-specified testing programmes: 10 programmes that allow the free selection of testing parameters such as pressure, tolerances, measuring period, etc., with 1 or 2 different testing pressures. Leak Finder Programme: special programme for the detection and localization of a leak in the watch under water • Vacuum and pressure ranges: Vacuum: variable between -0.2 and -0.8 bar in steps of 0.1 bar. (vacuum pump integrated). Pressure: variable between 0.2 and 10.0 bar in steps of 0.1 bar. (Connection to a separate compressor required). Accuracy of testing pressure: +/- 5 % of the set filling pressure. • Testing period: Automatic stabilization period: Determination based on the programmed tolerances and depending on the specific properties of the watch tested. Manual setting of the testing period: variable between 10 and 300 s.Automatic repetition of the test when results are not clear •

Stabilization period: Automatic stabilization period: automatic transition from stabilization totesting, when the required stability is reached. Manual setting of stabilization period: variable between 10 and 300 s. • Setting of tolerances: Predefined testing programmes: automatic determination based on the specific properties of the watch tested and on the testing pressure. Customer-specified measuring programmes: setting of the tolerance by %/min. • Measuring of the deformation: Measuring range: -300 to +1200 μm; Resolution display: 0.1 μm; Resolution sensor: 0.02 μm; Minimum required deformation of watch: with full measuring accuracy: 5 μm; with reduced accuracy: 1.5 μm • Maximum watch size: Diameter: 70 mm; Thickness: 28 mm; Width of watch strap: 85 mm; Height of support: 75 mm • Display of results: Percental regeneration of the deformation referred to one minute of testing period. Range 0 to 9.9 %, resolution 0.1 %. Automatic evaluation leak/no leak. Constant indication of deformation and testing pressure during testing, status indication for testing progress and count-down of remaining testing period. Display of date and time.
• Interfaces: USB for PC; RS232 for printer
• Power supply: Mains plug 210 - 240 V~. Output: 9 V~ / 1.2 A or:Mains plug 110 - 130 V~. Output: 9 V~ / 1.2